How To Prepare To Have Your Carpets Cleaned By Rapid Response Restoration | Water Damage LA | Water Damage Cleanup LA | Water Damage Repair LA

• Frequent Questions about Mold
• Frequent Questions about Carpet Cleaning

Moisture in Your Building

What problems can Excessive Moisture Cause in my building?
Excessive moisture is the fundamental driving force for many of our building ills and issues. Mold growth and wood rot are common problems with excessive moisture. Some species of troublesome mold do not actually require free water to thrive, excessive humidity is all that it takes. Humidity above 60% can be enough to drive a mold problem. In humidity above 50% Dust Mites thrive. With water leaks, overflows and flooding, if water stands and materials are wet for 48 hours or greater usually mold and bacterial growth will result and create numerous problems for the owner.

How do I know if I have Excessive Moisture in my Home?
There are numerous methods to check your Building moisture levels. The simplest way is by visual inspection. If paint is peeling, popping, or construction materials are soft these are definite clues. Another quick method for a general check is to determine the Relative Humidity. Owners should try to keep the RH less than the 50% to 60% range to avoid problems. Moisture meters are the best equipment to use to help locate roof leaks, plumbing leaks, saturation of building materials or slabs from other moisture sources, including condensation inside of walls. Large areas may be quickly scanned using an Infrared Thermographic Camera. Thermography uses relative temperatures to indicate evaporative cooling of wet areas in walls, ceilings, floors or other building materials. These and other techniques are helpful to the investigator when checking out Excessive Moisture in a building.

How important is it to act quickly?
It's critical. The longer it takes to dry a water-damaged building, the more expenses and damages increase because of mold, warpage, and other repairs. Conventional drying techniques can take up to five days, but with the TES technology used by Rapid Response Restoration, water-saturated surfaces and materials can dry in 30 hours or less. TES forces a high volume of heat directly to the affected area, rapidly evaporating the water. The vapor is eliminated with air evacuation/dehumidification. This reduces inconvenience and damage costs.

Professionals: Who Are They And What Can They Do?
Indoor Air Quality (IAQ) Professionals are trained in the inspection and testing of your home or business for Excessive Moisture and water leaks. Experienced Professionals are certified by written exam and are proven to have the knowledge and experience to address your issues. Certified IAQ Inspectors can conduct home inspections, sample suspect material, assess its condition, and advise about what corrections are needed.

When You Hire A Professional IAQIAQ Inspector?
Ask to see their credentials. Make sure that the Professional is currently Certified in their area of practice, if required. Make sure that the inspection will include a complete examination and proper use of instruments or the careful collection and lab analysis of samples. If desired, the inspector should provide a written evaluation describing any findings and give recommendations for correction or prevention.